Відео

I have no way of answering this question with 100% certainty, unfortunately. I do not have a 2009 MBW to plug in and test for myself. However, if this is true, and it does not work on 2009 BMWs, then I'm sure many others would have already reported this situation.... And I have NOT heard of the OTOFIX/Autel line of tools NOT working on any BMW. I suspect you either have a problem with the OBD2 DLC port in your vehicle, the wiring going to it, or the vehicles computer itself is having problems. What was the original problem with the vehicle in the first place that led you to buy a scan tool? I'm just trying to figure out if you are having problems with the computer in the vehicle. Not being able to "communicate" with a vehicle via a scan tool BECAUSE the computer in the vehicle is failing is actually fairly common. And lastly, does the scan tool work on any other vehicle that you plug into? If so, then it's very possible the BMW computer is the problem. And lastly, any new scan tool CAN be defective (as with any other brand new piece of electronics) If the tool doesn't work on any other vehicle, then you can just simply return it back to Amazon for a refund. Sorry for your trouble. Thanks for the question.

Yeah, those have been around for a long time. I had one of those on my pickup truck in the 1990's. I decided to use the hose on this generator because the location of the drain port is not the easiest to get at.... especially with larger hands. The hose is easier to grab, and use..... for me, anyway. Thanks for the comment.

Press and hold the power button down.... a few seconds later a message will pop up on the screen asking if you want to "power off" or "put to sleep". It shuts off just like any other android device. Accessing different modules can be different on every year/make/model but once you get to the screen that lists every individual module in the vehicle, you simply select the "abs module". Thanks for the question.

Nice! I'm glad you found the video helpful. Thanks for the comment and enjoy the new scan tool.

The generator in this video has been used on an almost weekly basis to power my friends RV, including his A/C unit, while at the race track on the weekends. It has been a fantastic generator. I think you will like it! Thanks for the nice comment.

No, I am not teaching thieves.... thieves already know how to break into cars. This tool unlocks the doors, it does not start the engine. Just because you're not a tool buyer doesn't mean Auto mechanics, auto auction employees, lock smiths, roadside assistance guys, tow truck drivers, etc, etc don't buy tools..... And all those people watch youtube, too. Not just you. Thieves don't care if they damage a car, they break windows. If i made a video about a hammer, would you claim I'm teaching thieves? lol

"generate email copies"..... Are you asking if this can send a scan report to a customer via email? Yes, it can do that. Thanks for the question.

@SlipFitGarage thanks brother.. I've already ordered it. It looks really good and super fast compared to my Foxwell

It's common to have an undersized ground conductor. For example, I have a 50 amp sub panel in my garage that is fed from the main panel in my house. The sub panel is fed with 6 gauge wire for both hots and the neutral. The ground conductor is 10 gauge. This meets the national electric code in my area. The ground conductor only sees a load long enough for a breaker to trip, which is almost instant when a fault happens. This is not nearly log enough to burn up the undersized ground conductor. You need to understand that wire size is rated for continuous load, it does NOT mean that smaller wires cannot handle a higher load, it just means smaller wires cannot handle a larger load for extended periods of time. For example, 12 gauge copper wire is rated for 20 amps..... that does NOT mean it will "burn up" at the very instant it sees 21 amps. That 12 gauge copper wire can probably handle 80 - 100 amps, for probably 45-60 seconds before it actually "burns". BUT in this application, the breaker will have already tripped LONG before the wire ever sees that amount of load, for any length of time. There are videos on youtube where people purposely overload wires to see just how much load they can actually handle before getting hot enough to cause a fire. You would be VERY surprised how long, and how much over current it takes to overload any specific gauge of wire to the point of it "burning up". I have no concern about MY bonding plug being undersized. Commercially produced bonding plugs are probably made with even smaller conductors inside. I also have no concerns about this device that I made for myself. I would be far more concerned about the generator coming from the factory WITHOUT a GFI outlet, or ANY ground fault protection, at all. And lastly, just as a disclaimer..... This video shows a solution that I made for myself, to solve a problem that is unique to MY situation. If someone else decided to build something similar for themself, they're on their own. This video is NOT a step-by-step "how-to". It's simply a video to show a device that I made for myself. Thanks for the comment.

Yep, it very high quality machinery with relatively little use. The USS IOWA museum maintenance team still uses this machinery today, on a regular basis to maintain the ship. Thanks for the comment.

That's great to hear. Thanks for the nice comment!

The tubing ACTUALLY measures 1.5 inch..... But the electrical couplers are sized differently. They don't use the ACTUAL size on the label. The 1 1/4 inch electrical couplers fit perfectly on tubing that ACTUALLY measures 1 1/2 inches. Just like the 1 1/4" EMT electrical conduit actually measures 1 1/2". It's confusing, I know.... and I agree.

@@SlipFitGarage Thank you very much for clearing that up. MUCH appreciated!

With the major update talked about in this video, ALL versions of the XTOOL D7 scan tool now have the ability to do a throttle re-learn. Thanks for the question.

Thank you!

Probably true.... but by how much? The total "area" of the inside of the hose is probably about 4 table spoons worth of oil. That amount of oil missing from the crankcase is probably not even measurable on the dipstick.... and it certainly is NOT going to affect longevity of the engine. The generator in this video has been running great since this video was recorded almost two years ago. Thanks for the comment.

The D7 DOES have WiFi capabilities. So does the newer D7S and the D7W. They all have wifi capabilities. If your cell phone has "hot spot" capability where it can share it's wireless connection via WIFI with other wireless devices, then yes... you can update the D7 over your cell phone's network. The D7 is Android based.... You would simply add the D7 to any WiFi network like you would with any other Android device, or any WiFi laptop, or any WiFi iPad, or WiFi desktop computer, etc. etc. Thanks for the question.

Hi, the only TopDon scan tools that I have reviewed are the Phoenix Lite 2, and the Artidiag 900pro. I don't really know much about the 900 lite.... Thanks.

Yes, it should run a standard 120 volt A/C unit with no trouble.

@@SlipFitGarage thank you!

You're welcome! Thanks for the comment!

Hi, it held up very well through the entire winter and spring, and now into summer. The canvas on my portable garage is still in good condition but I can tell that some of the "shine" has gone away so that proves to me UV light does slowly deteriorate the canvas cover. As others have mentioned, a secondary sacrificial tarp stretched over the canvas that comes with the portable garage would greatly help extend the life of the original cover. Anything to prevent strong UV light from the sun shining on the canvas cover will lengthen it's life. Mine is still good, but in another year or so, it would probably be time for another new cover. With all the strength improvements that I have made, it hasn't moved one bit. It is rock solid and it has survived some fairly strong wind storms . We had a very light winter this past year, but I have no doubt that it would survive one of our "normal" winters, too. My need for this portable garage has now ended, and I plan to take it down sometime in the next month or so. But I will keep it in storage and I will gladly use it again, if ever needed. No regrets here....

It will perform battery testing and load testing but it needs another module to go along with the scan tool. Either the Autel BT506 or the OTOFIX BT1 Lite. They are basically both the exact same tester, but branded with either Autel or OTOFIX. I own one of each and they are both the same.

Well, this thing isn't really designed or advertised to lower the "running" amps. It's specifically designed to lower the "starting" amps. So, if your running amps went down from 32 to 13 then something else is going on. Is it possible that you got a bad reading somewhere along the way? That's what I suspect happened. Either way, the finished results speak for themselves! Yes, these really do work.

Yes, correct.

Honestly, in my opinion, "odometer correction" should not be included in any scan tool. The need to HONESTLY "correct" the mileage happens very rarely. And it's FAR to easy for used car scammers to lower the mileage to increase a used car's value. Not to mention, it's very illegal. The last time I needed to genuinely change the mileage on an odometer was in 1994 on a Ford F350. Nowadays you can usually get your existing gauge cluster repaired and sent back to you within a few days which makes "correction" irrelevant. Don't get me wrong, I'm not saying you don't have a genuine reason for needing "odometer correction". However, it's strange to me that questions about "odometer correction" are some of THE MOST common questions I get in all of my scan tool videos. To directly and honestly answer your question.... I have no idea how to do it. I've never needed it, so I've never looked for it. It's probably under the "instrument cluster" module, then it's probably an "actuation test" or "special function". But please keep in mind, it CAN probably be found in different locations depending upon which year/make/model that you're plugged into. And lastly, it depends if the vehicle manufacturer has programmed the ability to let the mileage be changed by a scan tool into the vehicle's computer software to begin with. If the computer in the car doesn't have that ability programmed into it, then no scan tool on earth can perform that function..... which is the same for any other feature or function. Scan tools only send commands to the vehicle's computer, it's the computer that is actually performing these commands. Thanks for the question.

You mean Topdon? Sorry for your experience but unless you buy a Snap-on, or Matco scan tool, all the rest are made by Chinese companies, including Topdon ( I have two of those) If you don't like your Xtool scan tool, simply send it back to Amazon for a full refund. Can you explain to me what exactly the Topdon scan tool was capable of doing that your Xtool scan tool was not capable of, when trying to get your new ignition installed?

No, unfortunately it does not. I have told the people at OTOFIX that they really should include topology on this model since other scan tool in this price range DO have topology. Unfortunately, the people that I deal with at OTOFIX are only sales people. They don't get to make decisions about which features are included on which models..... however, they have supposedly forwarded my suggestions to the people who do make those decisions.... But I'm not holding my breath. lol. Thanks for the question.

Pity was seriously going to purchase, but I must have topology for me

Yep, the hose COULD crack and leak oil..... The rubber fuel line going from the gas tank to the carburetor could also crack and leak gasoline... I could get struck by lightning while setting up my backup generator in a thunderstorm or tornado and potentially be killed. Etc, etc... If I ran my life by everything hat COULD happen, I'd never leave my bedroom.

They're not impact sockets.... They're the best Chinesium non-name sockets money can buy. They're made out of some form of hard cheese. lol

This scan tool will display data that is supplied to it from the computer in your vehicle. If the computer in your truck can detect the misfire, then this tool should be able to display that information to you.

It will show monitors.... one way is to use "generic" OBD2 instead of the vehicle manufacturers overlay.

Thank you!

Excellent! Thanks for the comment.

The unit in this video is the D9 Pro. (not the standard D9) We don't have many of those European cars here in the US. The scan tool in this video has worked perfectly with every vehicle that I have ever plugged it into. Sorry for your trouble.

Thank you. I do appreciate your nice comment...

I rarely work on diesel trucks but I can tell you this..... If the truck manufacturer has included the ability for a scan tool to reset such settings in the vehicle's computer, then this scan tool should be able to command those setting/resets/etc... No scan tool is magic. Scan tools aren't actually "doing" anything. Scan tools simply allow the human user to send command for features/functions/resets that are already programmed into the vehicles computer. For example: If you looking to reset "X" sensor, but the manufacturer did NOT include that ability in the factory software, then no scan tool on earth will be able to command that particular reset. A scan tool can not command something that does not exist in the vehicles software. So, again.... if the setting and resets are available on the specific vehicle that you have in mind, then yes, this scan tool "SHOULD" be able to do those things. This is a full bidirectional scan tool. Any true "full bidirectional" scan tool should be able to command any pre-programmed feature (from the factory) on just about any modern vehicle. I hope my answer makes sense. Sometimes I'm not the greatest at explaining things with typed words. Thanks for the question.

@SlipFitGarage okay thank you. Just asking because I've worked with alot of bosch and snap on computers and I've had a few of each fail to reset adblue counters and other such functions before. If you had to rate it out of 10 would you say it's a decent scanner ?

@@ItsJustLuke656 Well, no scan tool brand is perfect..... not only does the vehicle need to have the specific capability that you're looking for, but it ALSO has to be programmed into the scan tool software..... and some features and functions can get overlooked and not included on some scan tools. This can happen with ANY brand of tool, while working on any brand of vehicle. The only way I could verify that the specific function that you are looking for would be for me to plug into the exact same make/model that you're asking about and verify that function with own eyes..... and unfortunately I do not have any diesel trucks available for me to plug into. Yes, this is a very decent tool. A LOT of guys swear by the Launch line of scan tools. I have used the one in this video on a few cars and I have been very impressed with it. I Am personally an Autel guy, but that is only because I am most familiar with them.... not because they are any better than any other brand. The Launch X431 series of tools in one of the best selling scan tool in the world as far as I know. They are great scan tools. And the good news is.... if you buy it from Amazon, and it doesn't do what you expect it to do for you, their return policy is very good. 🙂

Yes, anything the original D7 received in that major update a few years ago is also on all the new D7 models. The D7S, and the wifi wireless D7W are awesome tools!

What exactly are you looking for a scan tool to "do" on your vehicle? What is this tool NOT doing that you think it should be doing? This scan tool does show airbag fault codes. The airbag system in most vehicles operates a bit differently than most other vehicle systems. In my experience, the airbag system does a system check with every ignition key cycle. If there is a fault it turns the airbag light on during every key cycle. Unlike the check engine light that once it has been set, it will stay on regardless if the fault is present every time the key is turned on.... until someone with a scan tool turns it off. And because the airbag system does a system check at every key cycle, once a fault has been physically repaired (replaced sensor, fixed broken wire, etc) then when the key is turned on the next time, the system check will see that it has been fix and the light will not turn on. So, if you're looking to turn off an airbag light, the only way to do so, is to fix the actual fault that is causing the light in the first place. Thanks for the comment.

@@SlipFitGarage i did all the air bags and still shows up that they are deployed and the vci connector triggers a whole bunch of lights that were not on before its only a 14 subaru and it will not talk to my 08 vette peice of junk thanks for giving me some info

@@user-vk6xg9me1p If you replaced all the airbags and they are still showing as deployed, usually that means you need a new airbag control module. I am NOT an airbag expert. That is body shop work, and I'm not in the body shop business..... but in my experience, airbags that have been deployed because of an accident require a new module. It knows there has been an accident and it is NOT resetable via a basic scan tool. Of course this can vary depending upon which make/model of vehicle we're talking about but simply replacing airbags is only part of the process after an crash. I suspect you need a new air bag module.... this is NOT the fault of the D1 Lite. You could return the D1 Lite back to Amazon and then buy the most expensive scan tool on their entire website and I suspect you still wouldn't be able to reset the airbag module. If resetting the airbag module after a crash is not programmed into the vehicle's software from the factory, then NO scan tool on earth will be able to reset that module. You can't command something that doesn't exist.... Also, if this OTOFIX D1 Lite is causing weird lights to flash then either there is something still wrong with your vehicle, or you have a defective scan tool. (which is very possible) But I can assure you with 100% certainty that this is not how the D1 Lite "normally" works. If this WAS normal, we would have thousands of people complaining about it and so far, you're the only one who has mentioned this problem under any of my OTOFIX videos. This tool works perfectly on my 1998 C5 Corvette. I understand you are frustrated, I would be too.... But you can simply send your defective product back to Amazon for an exchange or a refund. (if that is where you bought it) Sorry for your trouble

@@SlipFitGarage well i am and this scanner should say what the problem is i am not a computor wiz but do know that this should not have triggered all sorts of other lights like tranny overheat traction control abs check engine it was like a christmas tree all over again but i do really like that to stepped up to help all those lights are not on until this scanner gets plugged in when i reclear with a cheap scan tool them all they stay off its only a 14 subaru the vette wont even read anything wont talk to it but going to try a few more times

It's been a while since I've used this scan tool (I have many others) but it SHOULD be able to help you with that. Of course it is 100% dependent upon the vehicle that you're currently plugged into at any given time. You may find mileage on one car, but not find it on another. This is true with every feature/function on every scan tool, not just this tool. I hope this helps. Thanks for the question.

Hi. I made a video about that power distribution box. That video can be found here: ua-cam.com/video/6DDUSwBhAM4/v-deo.html I have included a link to that power meter in that video description.... and in the first pinned comment. So, check out that video and then you'll find the direct link. Thank you.

Yeah, probably.... but like you said, it's not like I need even more distance. lol. Thanks for the comment!

The original D7 is a corded tool..... It's getting charged anytime it's plugged into a vehicle diagnostic port. The only time the battery is relevant is maybe when you're downloading and installing large software updates.... And if that's a problem, just plug the charge cord into the tool while it's updating. If it was a cordless tool, battery capacity might be an issue... but it's corded. Just my $0.02.....

Here's the six year update..... The information in this video is still accurate as far as bleeding brakes in a 2006 GMC Sierra 1500. The scan tool used in this video is still manufactured and sold..... but unlike before this video, ABS brake bleeding is in the Amazon listing in bold letters, not fine print at the bottom of the description. Also, since this video has been made, there have been MANY improvements in the scan tool world. There are a bunch of options for ABS brake bleeding in the same price range of the tool in this video. One of those options is the XTOOL A-30M. In fact, I did a video about it and it can be found here: ua-cam.com/video/rpwvihvKbx8/v-deo.html The A-30M would be my choice today if i was looking to simply bleed my ABS brake module. You supply your own smart phone or Tablet. The device shown in my video is a Samsung Tab S6 Ultra. You can use a much cheaper tablet if you would like. The XTOOL offers a LOT more features and functions over the Autel MaxiCheck for roughly the same price. (the Autel goes up/down in price on any given day so it's hard to say exactly)

No, traditional bleeding is still required. This video is probably 6 years old at this point, and I haven't listened to it in many years, but I'm pretty sure I explained all of this in the video if you listen long enough. Also, I have specifically answered this type of question in fine detail in this comment section probably 100 times since the video was made. Scroll around and see my other replies for more information. Thanks for the question.